Lab 60T Automatic Fluorescent Tablet Press with 7-inch Touch Screen

Laboratory Electronic Industry RT-300c Widen Flat Automatic Hot Press Machine

IPS HD Touch Screen 30T Automatic Fluorescent Tablet Press

Lab Cemented Carbide Cold Press Molds Set for Hydraulic Press

Lab Programmable 100T Automatic Isostatic Press

Laboratory Electronic Industry RT-300c Widen Flat Automatic Hot Press Machine

Lab 24T High Temperature Flat Hot Press Machine

Laboratory Electronic Industry RT-300c Widen Flat Automatic Hot Press Machine

Lab High Temperature Automatic Hot Press with 300×300mm Mold Size

Lab Cemented Carbide Cold Press Molds Set for Hydraulic Press

Different Tonnage Manual Electric Automatic Tablet Press with Boric Acid Mold

 Laboratory 60 Ton  Automatic Hydraulic Press with Programmable Controller

Touch Screen Type Vacuum Hot Compression Sealing Machine with Special Aluminum Heating Plate for Perovskite Synthesis

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna Whatsapp：+86 131 7450 6016 Skype: gia@tmaxcn.com

Battery Compression Tester for Simulating Crush Scenarios

Battery Compression Tester for Simulating Crush Scenarios I. Product Overview This battery compression test machine is designed to simulate the compression of batteries during use, transportation, storage, or disposal, to evaluate their ability to withstand compression without explosion or fire. The battery passes the test if it does not explode or catch fire. II. Standards GB 31241-2014, GB/T 8897.4-2008, YD/T 2344.1-2011, GB/T 21966-2008, MT/T 1051-2007, YD 1268-2003, GB/T 19521.11-2005, YDB 032-2009, UL 1642, UL 2054, IEC 62281, IEC 60086  III. Technical Parameters: Drive Method Hydraulic drive Force Range 1 ~ 20kN Force Accuracy 0.1N Unit Conversion kg, N, lb Compression Stroke 200mm or 300mm Force Display LCD or touchscreen display Compression Head Standard compression head, area ≥ 20cm² Compression Force 13 ± 0.2kN, hold for 1 minute Cabinet Material Stainless steel inner box, cold-rolled steel plate outer box with spray coating Features Ventilation and pressure relief design at the rear of the cabinet, lighting inside the test chamber Test Space 300x300x300mm (LxWxH) Dimensions 700x800x1830mm (LxWxH) Weight Approx. 220kg Power Supply AC380V, 50HZ          

Battery High Altitude Low Pressure Simulation Test Chamber

Battery High Altitude Low Pressure Simulation Test Chamber  I. Product Overview: This test chamber is designed according to UL, EN, IEC, and other standard testing requirements. It can rapidly achieve the low-pressure storage state of the sample and automatically control the test cycle. The pressure changes within the chamber are monitored throughout the test, and the test is automatically terminated once the set parameters are met. The chamber simulates the storage conditions for batteries and battery packs at a pressure of 11.6 kPa or lower and an ambient temperature of (20±5)℃ for 6 hours. A battery is considered qualified if there is no leakage, no gas emission, no disintegration, no rupture, and no fire, and the open-circuit voltage of each tested battery or battery pack after the test is not less than 90% of its voltage before the simulation test. II. Compliance Standards: GB/T 18287, UL 2054, UN 38.3, UL 1642, IEC 61960, IEC 62133, and other relevant testing standards.  III. Product Parameters Pressure Range 0.5 ~ 100 kPa, commonly used 11.6 kPa Pressure Fluctuation ≤ 5% Timer LED display, adjustable 0-99 hours (H/M/S seconds switchable) Vacuum Display Pointer type or digital display Safety Device Over-pressure protection, automatic alarm in case of operational error or end of test time Inner Chamber Material Stainless steel Outer Chamber Material A3 cold-rolled steel plate with baked paint Shelving Material Stainless steel Inner Chamber Dimensions 400x400x450mm (LxWxH) Outer Chamber Dimensions 550x550x1200mm (LxWxH) Weight Approx. 120kg Power Supply AC 380V, 50Hz          

Battery Compression Penetration Impact Testing Machine

 Battery Compression Penetration Impact Testing Machine I. Product Overview: The ZS-1015 is a newly designed multi-functional testing machine by our company, integrating compression, penetration, and impact testing into a single unit. It is specifically designed to save space and reduce costs while evaluating the safety performance of batteries through these three testing methods. This equipment is essential for battery manufacturers and research institutes. II. Compliance Standards: Compression Test Standards: GB/T 2900.11-1988, YD 1268-2003, SJ/T 11169-1998, UL 1642, GB/T 8897.4-2002, SJ/T 11170-1998, YDB 032-2009, UL 2054, QB/T 2502-2000 Penetration Test Standards: GB/T 18332.2-2001, MT/T 1051-2007 Impact Test Standards: UL1642, UL2054-2005, UN38.3, GB/T 18287-2000, SJ/T 11169-1998, YD 1268-2003, SJ/T 11170-1998 III. Product Parameters Optional Auxiliary Functions Voltage acquisition system, video monitoring system, fire extinguisher system, safety explosion-proof system, smoke filtration system Test Chamber Size ·  200 × 200 × 200 mm ·  300 × 300 × 300 mm (customizable as per requirements) External Dimensions 1500 × 750 × 2050 mm (L × W × H) Control Box Dimensions 500 × 500 × 1200 mm (L × W × H) Compression/Penetration Parameters Speed 0–80 mm/min (adjustable), customizable up to 200 mm/min Compression/Penetration Stroke 0–300 mm Test Force Approximately 13 kN, with immediate pressure release upon reaching the maximum value Hold Time 0–99 hours, 99 minutes, 99 seconds Drive Method Hydraulic drive High-Temperature Steel Needle Diameter φ3–φ8 mm Penetration Speed Accuracy ±0.1 mm/s Impact Parameters Steel Rod Diameter φ15.8 mm Falling Ball Weight 9.1 kg or 10 kg Impact Height 610 mm or 1000 mm Test Conditions The impact object is raised to a specific height and released to free-fall in a vertical direction without tilting or wobbling.