Customizable Teeth Whitening Strips Coating Equipment Dental Stickers Coater

Customizable Teeth Whitening Strips Coating Equipment Dental Stickers Coater This equipment is specialized in making liquid materials into thin film. It can be used to make quick-dissolve oral films, trans films, and mouth freshener strips, having wide application range in pharmaceutical field, food industry and etc.,  The dental paste coating machine is made of aluminum alloy, PLC control and touch screen operation. The equipment is removable, which is convenient for entering the elevator. The dental paste automatic coating machine has complete functions and covers a small area. The coating machine is easy to clean. Teeth Whitening Strips' Function: The gel layer on the whitening tooth paste is dry and can produce high adhesion when fused with saliva water. It can remain attached to the teeth for a long time. Specification Control system Independent research and development system Uniform coating ＜6% Coating width Effective coating width 300MM（discharge 400MM), customizable Coating thickness 0.01-2MM（wet film） Coating typoe Double-sided + single-sided double-ended (can be used separately) Tension control Automatic tension adjustment (according to the membrane tension required to adjust) Doctor blade lift Pneumatic lifting Oven length 2-20 meters (2 meters per section, customizable) Dryingoven temp Normal temperature ~100 degrees (can be segmented constant temperature) Heating method Electrical heating Heating tube Adopt stainless steel fin heating tube Deviation correcting device Automatic rectifying of winding Production speed 0.1-5 m/min (steady at low speed) Roll up function Double reel up and down Balance of winding Floating roll Stripe function Strip with double edge Waste collection unit Double aeration axis with magnetic powder Exhaust system Adjustable wind power Oven blower Adjustable wind power Oven lift Pneumatic automatic lifting Glue supply system Upward side Diameter of retraction Retracting and discharging diameter 500MM Type of motor 3-wire variable frequency motor Emptying device Inflatable shaft 3 inches Lamination station Automatic laminating (with heated roller) Equipment material Aluminum alloy Power supply 380V 50Hz Equipment power 60KW    

Beeswax Wrapper Coating Machine Cotton Fabric Coater

The hot melt coating machine uses a hot melt adhesive heating tank and a special hot melt adhesive extrusion coating head to achieve uniform coating. Lamination and die-cutting are optional.

Comma Blade & Gravure Roll Dual Coating Heads Multifunctional Coating Machine

The hot melt coating machine uses a hot melt adhesive heating tank and a special hot melt adhesive extrusion coating head to achieve uniform coating. Lamination and die-cutting are optional.

Customizable Anilox Roller Coating Machine

Customizable Anilox Roller Coating Machine Anilox roller coating machine is using an anilox roller to transfer the coating solution onto the substrate. The surface of the anilox roller has many tiny cells that can precisely control the amount of coating solution, achieving a high-precision and uniform coating. The coating width and oven length can be customized. Specification Control system  independently developed Coating width  200mm-1500mm Coating method  Anilox roller Coating thickness  0.005-5MM (uniformity ± 3%) Thickness adjustment  digital micrometer Heating channel  drying channel 2-20 meters (1 meter per section) (customizable) Heating control  thermocouple sensor Tension control  Adjustable tension Deviation correction device  fully automatic deviation correction for feeding/receiving Drying duct fan  adjustable speed Oven insulation  asbestos insulation layer Collecting and discharging diameter  Collecting and discharging material diameter 300mm (customizable) Rear lamination  finished lamination (steel pipe+rubber hose) Wind speed control  with wind filtering at the outlet of the drying tunnel (uniform wind speed) Coating speed  1-30 meters/minute (adjustable according to the drying condition of the adhesive) Drying passage roller  304 stainless steel Drying channel material  304 stainless steel (box) Heating method  stainless steel heating tube Oven temperature  room temperature -160 degrees (can be kept at a constant temperature) Drying track structure  tiled Waste heat recovery  with automatic waste heat collector Glue supply method  pressure bucket Expansion axis  3-inch gas expansion axis Drying channel lifting  cylinder lifting Exhaust system  centrifugal fan (external interface 100MM) Equipment power supply  380V Control AC24V Equipment power  12KW (peak)    

Customizable Extrusion Coater Slot Die Coating Machine

Customizable Extrusion Coater Slot Die Coating Machine The extrusion coating machine is a device that uses a narrow extrusion coating die to non-contact coating the substrate. This equipment can achieve two types of coating functions: continuous coating and stripe coating through the combination of slot die narrow extrusion coating die, precision metering feeding system, and feeding valve. The equipment has high coating accuracy, good consistency and stability, and is widely used in the lithium commercial battery, FCCL, optical film, high adhesive tape, and various functional film industries. Specification Control system  independently developed Coating width  200mm-1500mm Coating method  Slot die Coating thickness  0.005-5MM (uniformity ± 3%) Thickness adjustment  digital micrometer Heating channel  drying channel 2-20 meters (1 meter per section) (customizable) Heating control  thermocouple sensor Tension control  Adjustable tension Deviation correction device  fully automatic deviation correction for feeding/receiving Drying duct fan  adjustable speed Oven insulation  asbestos insulation layer Collecting and discharging diameter  Collecting and discharging material diameter 300mm (customizable) Rear lamination  finished lamination (steel pipe+rubber hose) Wind speed control  with wind filtering at the outlet of the drying tunnel (uniform wind speed) Coating speed  1-30 meters/minute (adjustable according to the drying condition of the adhesive) Drying passage roller  304 stainless steel Drying channel material  304 stainless steel (box) Heating method  stainless steel heating tube Oven temperature  room temperature -160 degrees (can be kept at a constant temperature) Drying track structure  tiled Waste heat recovery  with automatic waste heat collector Glue supply method  pressure bucket Expansion axis  3-inch gas expansion axis Drying channel lifting  cylinder lifting Exhaust system  centrifugal fan (external interface 100MM) Equipment power supply  380V Control AC24V Equipment power  12KW (peak)    

Customizable Immersion Double-Sided Dip Coating Machine Extrusion Coater

Customizable Immersion Double-Sided Dip Coating Machine Extrusion Coater This coating machine is suitable for substrates that require double-sided dip coating. Suitable for slurries with lower viscosity. The coating width, oven length, and temperature can be customized. Specification Control system  independently developed Coating width  200mm-1500mm Coating method  double-sided dip coating Coating thickness  0.005-5MM (uniformity ± 3%) Thickness adjustment  digital micrometer Heating channel  drying channel 2-20 meters (1 meter per section) (customizable) Heating control  thermocouple sensor Tension control  Adjustable tension Deviation correction device  fully automatic deviation correction for feeding/receiving Drying duct fan  adjustable speed Collecting and discharging diameter  Collecting and discharging material diameter 300mm (customizable) Rear lamination  finished lamination (steel pipe+rubber hose) Wind speed control  with wind filtering at the outlet of the drying tunnel (uniform wind speed) Coating speed  1-20 meters/minute (adjustable according to the drying condition of the adhesive) Drying passage roller  304 stainless steel Drying channel material  304 stainless steel (box) Heating method  stainless steel heating tube Oven temperature  room temperature -160 degrees (can be kept at a constant temperature) Drying track structure  Tiled Waste heat recovery  with automatic waste heat collector Glue supply method  pressure bucket Expansion axis  3-inch gas expansion axis Drying channel lifting  cylinder lifting Exhaust system  centrifugal fan (external interface 100MM) Equipment power supply  380V Control AC24V Equipment power  12KW (peak)    

Graphene Coating Machine Graphene Heat Conduction Film Coater with Return Oven

Graphene Coating Machine Graphene Heat Conduction Film Coater with Return Oven It is applicable to the precise coating production of high thermal conductivity graphene heat conduction film and graphene heat conduction film in the fields of smart phones, tablet computers, smart VR, planetary circuits, electrothermal painting, floor heating film, etc. The coating machine has better price and higher production efficiency   Specification Control system Independent research and development system Uniform coating ＜5% Coating width Effective coating width100-380mm Coating thickness 0.005-3MM（wet film） Coating typoe Doctor blade Tension control Automatic tension adjustment (according to the membrane tension required to adjust) Oven length 10meters(Back to type) Dryingoven temp Normal temperature ~120 degrees (can be segmented constant temperature) Heating method Electrical heating Oven wind force Adjustable Deviation correcting device Automatic rectifying of winding Exhaust air system Suction is adjustable Production speed 1-20 m/min Equipment air pressure 6 KG/cm2 Power supply 380V 50Hz Equipment power 10KW Dimension 2700*1300*1800mm    

Compact Small Lab Roll To Roll Hot-Melt Adhesive Coater

The hot melt coating machine uses a hot melt adhesive heating tank and a special hot melt adhesive extrusion coating head to achieve uniform coating. Lamination and die-cutting are optional.

Doctor Blade Coating Machine For Sheet Material Tractive Tension

The hot melt coating machine uses a hot melt adhesive heating tank and a special hot melt adhesive extrusion coating head to achieve uniform coating. Lamination and die-cutting are optional.

Carbon Fiber Automatic Laminating & Coating Machine

The hot melt coating machine uses a hot melt adhesive heating tank and a special hot melt adhesive extrusion coating head to achieve uniform coating. Lamination and die-cutting are optional.

Customizable Meyer Rod Coating Machine Metering Rod Coater

The hot melt coating machine uses a hot melt adhesive heating tank and a special hot melt adhesive extrusion coating head to achieve uniform coating. Lamination and die-cutting are optional.

Paper Wax Paraffin Coating Machine Single Side Waxen Coater

The hot melt coating machine uses a hot melt adhesive heating tank and a special hot melt adhesive extrusion coating head to achieve uniform coating. Lamination and die-cutting are optional.

Multiple Coating Head Units Comma Blade & Gravure Roll & Rod Bar Coating Machine

The hot melt coating machine uses a hot melt adhesive heating tank and a special hot melt adhesive extrusion coating head to achieve uniform coating. Lamination and die-cutting are optional.

Automatic Coating Vacuum Adsorption Coater Machine Using in Perovskite Films

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna Whatsapp：+86 131 7450 6016 Skype: gia@tmaxcn.com