Laboratory Benchtop Dry Glove Box (31"x 26" x 28") with Airlock and vacuum Flange & Gauge

Benchtop Vacuum Glove Box (31"x 26" x 28") with Airlock and vacuum Flange & Gauge - EQ-VGB-3 EQ-VGB-3 is a middle size heavy duty stainless steel glove box with Airlock Chamber, Gauges and vacuum Flanges, which allow glove box operate under vacuum to remove moisture and oxygen without expensive inert gas purging, It is an ideal tool for material and chemical researchers to process air sensitive materials and solutions.

Laboratory Transparent Acrylic Vacuum Glove Box (35"x19"x20") with Optional Vacuum Flange & Gauge

Transparent Acrylic & Plexiglass Vacuum Glove Box (35"x19"x20") with Optional Vacuum Flange & Gauge -VGB-2 1. Bench top transparent glove box offers larger inert gas environmental workspace with vacuum air  locker and side door. 2.  The glove box is made of transparent polycarbonate for clear viewing from any angle. 3.  Polycarbonate construction affords resistance to a wide range of chemicals, high-impact strength and scratch-resistance and the smooth, hemispherical interior cleans easily..

Lab Stainless Steel Vacuum Glove Box

DESCRIPTION: VGB-3 is a middle size heavy duty stainless steel glove box with Airlock Chamber, Gauges and vacuum Flanges, which allow glove box operate under vacuum to remove moisture and oxygen without expensive inert gas purging, It is an ideal tool for material and chemical researchers to process air sensitive materials and solutions.

Laboratory Glove Box with HEPA Air Filter

Lab Glove Box with HEPA Air Filter 1 TMAX-GB-100 HEPA Filter Glove Box is used to operate the pollutants by providing a physical good sealing environment barrier, protecting laboratory environment. 2 TMAX-GB-100 Precise HEPA filter type glove box adopt the air inlet and vent HEPA filters, to protect the operator from the contamination of the harmful air in the cabinet.This kind of glove box is mainly used in pharmaceutical industry, nanotechnology and biochemistry.Microbes, low levels of radioactive material, chemical carcinogenic agents, etc. Can also be used in such glove box.

Lab Vacuum Glove Box With Anhydrous And Anaerobic Environment

1 TMAX-GB-800S Lab glove box is a kind of equipment with anhydrous and anaerobic environment. 2 The lab glove box device is mainly composed of display system, transfer chamber, vacuum system, control system,box, circulation purification regeneration system components.

Lithium Battery Glove Box With Dry Air And Vacuum Function

Lithium Battery Glove Box With Dry Air And Vacuum Function 1 The glove box can supply a Closed working environment with Maintaining clean and humidity. It is used for lithium battery producing process from electrolyte filling to vacuum pre-sealing.  2 The Electrolyte filling machine, vacuum holding box and vacuum pre-sealing machine need to put in the glove box with making battery under environment without Much H2O and O2. We can input dry N2 into the glove box to improve the environment. 3 This glove box adopts Fission modular design, we can add or combination every section as we wanted according to production line. 4 Transparent toughened glass surface as a visual operation, convenient to observe 5 Designed with antechamber and Transition tank in front and end, easy for battery loading. And the antechamber and also be customized with Vacuum function. 6 Dimension : 1000*1400*1800mm/section, customized 7 Source voltage : AC110V/220V 50/60HZ 8 Power : 0.5KW 9 Air source : 0.6-0.7MPa, 5L/S

Organic Glass Glove Box for Lab

Main features:   1. Material of the transparent p. m. m. the be clear at a glance in the cabinet, simple structure and convenient use; 2. Can change through ultraviolet light, chemical resistant and climate; 3. Under normal conditions, the stable form, highly transparent, chemically resistant and gas changes; 4. The tank is equipped with a multi-socket, easy to carry out scientific experiments; 5. Good airtight performance, and shielding and absorption of radioactive substances; emanating from α-ray and low-energy β-rays, in order to protect human tissue Phi ionizing radiation damage.     Main application: In scientific research units with low energy radioactive material experimental work, Inoculation of aseptic and chemical qualitative and quantitative analysis relevant airtight quarantine action, may work in the operating chamber, electronic materials, magnetic materials, equipment, batteries, process biological cultivation, food packaging, battery materials, the need to protect the atmosphere for processing. Model features A: As radiation protection, dust-proof isolation operation or special operations, no transition box B: As a hydrophobic anaerobic glove box use, the transition chamber may be evacuated, the operating chamber of inert gas displacement C: Operation box and transition box to perform vacuuming operation, the degree of vacuum can reach ultimate vacuum -0.1MPA

Benchtop Vacuum Glove Box with Airlock and vacuum Flange and Gauge

Single purification unit, PLC control and touch screen operation system. under standard conditions, a standard atmospheric pressure, relative humidity 65%, 99.999% of inert gas source, water oxygen index less than 1 PPM.    vacuum glove box functions 1,Closed recirculation: Inert gas recirculate through circulating fan and purifier in the glove box,get rid of water and oxygen continuously. 2,automatic regeneration control:the materials used for getting rid of water and oxygen can be regenerated by program control. 3,automatic cleaning:The replacement of the gas in the glove box is controlled by cleaning valves. 4,The pressure in the box is controlled by PLC.It can be free set within +/-10mbar.If overtop +/-12mbar,automatic protection will start. 5,Vacuum pump will start automatically when the system required.    vacuum glove box specifications. 1,Glove box: single cooperation, stainless steel 304, size:1220(L)*750(W)*900(H)mm.Height of underframe is 900mm. 2,Main pipe:stainless steel,valves size DN40. 3,adapter module size: large one: Dia. 360mm,L600mm small one: Dia. 100mm,L300mm. 4,window:tempered glass,thickness 8mm 5,gloves: butyl rubber(imported,7B1532).Diameter of the gloves hole:200mm 6,circulating fan:flow90m3/h,frequency conversion 7, water analyzer :independent display panel;measurement range:0-2000ppm,imported from USA XENTAUR,XDT-PM 8,oxygen analyzer: independent display panel; measurement range:0-10ppm,0-100ppm,0-1000ppm,0-25%,high precision,no drifting,precision 1% 9,organic solvent absorber: installed on the behind,in parallel with main cycle pipe,can absorb the organic solvent first.

Vacuum Inert Gas Tank Glove Box With Viewing Window

Features: TMAX-VGB-4 Vacuum Seal Glove Box  (also known as the vacuum inert gas tank) allows the test samples to be safe to put in and out. And the operation, reaction and test under the condition of no oxygen and absolute condition, to ensure the normal operation of the scientific experiment. This product is an ideal device for scientific experiment in Colleges and universities, scientific research institutions and enterprises. 1. Viewing window view, bright and wide.  2. Operating gloves using thick latex gloves, sealed reliable. 3. Stainless steel structure, corrosion resistance, easy to clean, no pollution .  4. The box is equipped with porous electric socket, which is convenient for scientific experiment. 5. The box can be equipped with electric furnace, local heating. 6. Use small filter room, fast, convenient and small samples, the maximum guarantee working environment in the studio, save the atmosphere and the operation time. 7. Market only two transition box, saves atmosphere and operation time. Ensure in studio work environment.  

Dual-Workstation Laboratory Vacuum Glove Box with H2O and O2 Purification System

Dual Chamber Glove Box with Gas Purification System TMAX-SDX1200-02 is a dual stainless steel glove box designed for researchers in material science, chemistry, semiconductor, and related topics. The purification cylinder is made of BASF antioxidant materials from Germany and UOP water adsorbent materials from the US in order to achieve a low water and oxygen concentration of lower than 1ppm, such that experiments can be conducted in an ultra clean and highly purified gas environment. It is integrated with vapor pressure control system, purity control system, automatic gas purity regeneration control system, auto alarm, and system data log recording. TMAX-SDX1200-02 is widely used in preparing nanomaterials, Li-ion battery materials, catalysts, and metallorganics. 

3 Working station laboratory Glove Box with Gas Purification System

Dual Chamber Glove Box with Gas Purification System TMAX-SDX1200-02 is a dual stainless steel glove box designed for researchers in material science, chemistry, semiconductor, and related topics. The purification cylinder is made of BASF antioxidant materials from Germany and UOP water adsorbent materials from the US in order to achieve a low water and oxygen concentration of lower than 1ppm, such that experiments can be conducted in an ultra clean and highly purified gas environment. It is integrated with vapor pressure control system, purity control system, automatic gas purity regeneration control system, auto alarm, and system data log recording. TMAX-SDX1200-02 is widely used in preparing nanomaterials, Li-ion battery materials, catalysts, and metallorganics. 

Stainless Steel Vacuum Glove Box with H2O & O2 Purification System

Dual Stainless Steel Vacuum Glove Box with H2O & O2 Purification System

Lab Vacuum Glove Box with H2O & O2 Purification System

Lab Vacuum Glove Box with H2O & O2 Purification System

Stainless Steel Vacuum Glove Box with Closed Loop Gas Circulation

Dual Stainless Steel Vacuum Glove Box with H2O & O2 Purification System

Benchtop Vacuum Glove Box with Airlock and vacuum Flange and Gauge

Single purification unit, PLC control and touch screen operation system. under standard conditions, a standard atmospheric pressure, relative humidity 65%, 99.999% of inert gas source, water oxygen index less than 1 PPM.    vacuum glove box functions 1,Closed recirculation: Inert gas recirculate through circulating fan and purifier in the glove box,get rid of water and oxygen continuously. 2,automatic regeneration control:the materials used for getting rid of water and oxygen can be regenerated by program control. 3,automatic cleaning:The replacement of the gas in the glove box is controlled by cleaning valves. 4,The pressure in the box is controlled by PLC.It can be free set within +/-10mbar.If overtop +/-12mbar,automatic protection will start. 5,Vacuum pump will start automatically when the system required.    vacuum glove box specifications. 1,Glove box: single cooperation, stainless steel 304, size:1220(L)*750(W)*900(H)mm.Height of underframe is 900mm. 2,Main pipe:stainless steel,valves size DN40. 3,adapter module size: large one: Dia. 360mm,L600mm small one: Dia. 100mm,L300mm. 4,window:tempered glass,thickness 8mm 5,gloves: butyl rubber(imported,7B1532).Diameter of the gloves hole:200mm 6,circulating fan:flow90m3/h,frequency conversion 7, water analyzer :independent display panel;measurement range:0-2000ppm,imported from USA XENTAUR,XDT-PM 8,oxygen analyzer: independent display panel; measurement range:0-10ppm,0-100ppm,0-1000ppm,0-25%,high precision,no drifting,precision 1% 9,organic solvent absorber: installed on the behind,in parallel with main cycle pipe,can absorb the organic solvent first.