Slitting Machine for Cylindrical Cell Electrode Cutting

1 TMAX-MQ300A semi-automatic electrode die cutter is mainly used for pouch cell electrode sheet cut for stacking pouch cell battery. It is a necessary tool in the production line of pouch cell to produce specific shapes of cathodes and anodes with current collector tabs.   2 This Semi Automatic Die Cutter machine adopts Safety Curtain built in the front of the machine and double start button ensures operation safety when electrode sheets are fed from the front.   3 High speed, high accuracy, long lifetime to make cutted electrode without burr, to get a good consistency.   4 This model has max die dimension with 200*300mm, if need other models, please choose the TMAX-JD-500model with max die size up to 500*500mm.

Lab Double Tabs Cutter and Shaping Machine for Lithium Battery Making

Lab Double Tabs Cutter and Shaping Machine for Lithium Battery Making Introduction It is mainly suitable for the flat pressing and shaping after cutting the tabs of laminated cells, fixed-length cutting and trimming of the electrode tabs of the batteries, and the double cutters are mutually insulated.   Main features *Shangyin linear slide rail group is used for guiding, and the guiding accuracy is extremely high to ensure zero clearance between the upper and lower cutters and long service life, the upper and lower die are flat; *Simple operation, high efficiency, stable temperature and good consistency. *Using fixtures to assist the feeding, the cylinder drives the mold to achieve shaping. *Set a product positioning tray to facilitate the positioning and placement of batteries; *Beautiful, reliable, convenient and fast; *The speed of the upper and lower platens and the shaping time can be adjusted and set; *The upper and lower cutters are made of high-speed steel, with sharp blades; *Double cutters are insulated from each other; *The cylinder controls the cutter to trim the battery pole piece and tab, which is easy to be automated; *Set the product positioning tray to facilitate the positioning and placement of the batteries. *Beautiful, reliable, convenient and fast;   Technical parameter Mold hardness ≥HRC58 Mold life 3 million times / grinding Upper and lower pressure plate material Imported S136 material, no deformation, no rust Shaping temperature RT~250℃ The distance between the upper and lower pressing plates >50mm Single cutter 80mm long Insulation The left and right cutters are insulated from each other Position The blade positioning block of the tab cutting machine and the battery side positioning block are adjustable Cutter life 1 million times/grinding Speed Air pressure 600 times/hour Air compressed air source 0.5Mpa～0.7Mpa                   

Automatic Slitting Machine for Li ion Battery Electrode Sheets Crosscutting

Automatic Slitting Machine for Li ion Battery Electrode Sheets Crosscutting Introduction This product is mainly used for single-piece cutting of positive and negative plates of lithium batteries. The cutting length, quantity and speed can be set arbitrarily, and it can be cut separately. This machine has an automatic unwinding function. The automatic unwinding and automatic stop are controlled by the tension frame. The speed is adjustable during unwinding, and the feeding axis is pneumatic. The shaft is expanded and it is convenient to load and unload.   Main features *The cutting length, quantity and speed can be set arbitrarily, and can be cut separately; * Unwinding automatically adjusts the tension; *Continuous cutting, fixed length and cursor tracking two modes are optional, adapt to multi-segment cutting, the compensation before and after the incision can be set; * The width is 10~300mm, and the length is set arbitrarily within 1~9999 mm. *The machine adopts PLC man-machine interface control, easy to use and operate. *Exquisite appearance, the sheet metal adopts three-dimensional geometric design, which is simple and beautiful; *Easy to operate, safe and reliable, small size;   Technical parameter Unwinding The unwinding air shaft is fixed, and the unwinding tension uses automatic unwinding and constant tension Fixed length cutting speed 5~250mm/s Chasing color cutting speed 5~150mm/s Unwinding diameter (Max) 250mm Burr condition ≦25um Power supply 220V/50Hz Power 1.2KW Compressed air 0.5Mpa～0.8 Mpa Scope of application Width 300mm, length 1～9999 mm cutting Cutting accuracy Fixed length using servo system and color code sensor to track the fixed length, high accuracy, cutting accuracy within the adjustable range ± 0.3mm Dimensions L700*W700*H1000mm (the length of the guide plate is 800 and the total length of the machine is 1500mm) Weight About 240kg  

Tabs Cutting and Testing Machine for Polymer Pack Assembling

Tabs Cutting and Testing Machine for Polymer Pack Assembling

Automatic Alloy Strip Nickel Belt Cutting Machine

Automatic Alloy Strip Nickel Belt Cutting Machine