Battery Combustion Test Machine

Battery Combustion Test Machine  I. Product Overview: This device is used to observe the combustion behavior of batteries when exposed to a burner. The mesh screen is fixed 38.1 mm above the burner. It features 20 holes spaced every 25.4 mm, with a wire diameter of 0.43 mm. The burner is ignited, and the combustion is monitored until the battery explodes or burns out. The equipment includes a burner with a support frame, test table, standard metal mesh cover, and standard metal mesh screen. II. Compliance Standards: SJ/T 11169-1998 (eqv UL 1642:1995) SJ/T 11170-1998 (eqv UL 2054:1997) UL 1642 GB 8897.4-2002 6.3.2.9 IEC 60086-4:2000  III. Product Parameters Burner Bunsen burner with an inner diameter of 9.5 mm, length approximately 100 mm Flame Application Time 0 to 9999 seconds Test Hole Surface Diameter 102 mm Device Features Automatic ignition and fully automated test process Test Hood Width 24″ (610 mm), octagonal Test Hood Height 12″ (305 mm) Control Mode Button control Combustion Gas Liquefied petroleum gas or methane (customer-supplied) External Dimensions 900 x 930 x 970 mm (L x W x H) Weight Approximately 75 kg Power Supply AC 220V, 50/60 Hz