1500W Fiber Laser Welder for Thick Nickel Strip Welding

MSK-180S is a gas driven die cutter for producing pouch battery cathode/anode electrodes ( no electricity required ) Its compact design enables the operation inside a glove box with Ar atmosphere where moisture/oxygen-sensitive electrodes will be cut

Auto Roll to Roll Tab Welding Machine

Auto Roll to Roll Tab Welding Machine 1.Introduction： The machine adopts PLC automatic control to realize the functions of fixed length belt feeding, belt cutting, gluing, cover plate feeding and welding instructions； 2. Specification： Item Specification 1 ．Al Ni Sheet   1. 1 Thickness 0. 1-0.2mm 1.2 Width 3-4mm(can be customized)     2. Belt feeding   2. 1 Length 1-60mm  (can be customized) 2.2 Length error ±0.5mm 2.3 Efficiency 25-40 PCS/min(It is related to the speed of manual pole feeding)     3. Electrical parameters   3. 1 Power Supply 1P 220V 3.2 Input Power 2000W 3.3 Input air pressure 0.4-0.7Mpa, flow20L/min ，Utilization rate:50%   3. Composition:： The machine is composed of unwinding, buffering, shaping, gluing, tape feeding, tape cutting, electrical control and other mechanisms.   4 .Environment: 1.Ambient temperature: -5～35℃ 2. Relative humidity:5-75%HR 3 .Power Supply:AC220V 1P Voltage fluctuation is less than ± 10%; Power supply >1KVA               

1500W Fiber Laser Welder for Prismatic Battery Connector Welding

MSK-180S is a gas driven die cutter for producing pouch battery cathode/anode electrodes ( no electricity required ) Its compact design enables the operation inside a glove box with Ar atmosphere where moisture/oxygen-sensitive electrodes will be cut

Auto Welding Machine for Prismatic Cell Production Line

Automatic 2 in 1 Ultrasonic Tab Welding Machine for Prismatic Cell Production Line Ⅰ、Equipment Introduction ● This equipment is mainly used for the production and winding of prismatic cell into one piece; ● The electrode sheet is automatically wound with the separator after welding the tabs and the protective tape to form a battery cell; ● Automatically calculate the diameter of the coil and provide an alarm for lack of material. The separator eliminates static electricity through the negative ion generator. The electrode sheet has the functions of powder brushing and dust removal and iron filing. The tension of the electrode sheet and the separator achieves taper winding, and the cutter and other vulnerable parts arrive Service life automatic alarm function, three-station winding, automatic needle threading, changing stations, closing, and tape termination; ● Automatically unload and carry out Hi-Pot test; automatic rejection of defective products, and automatic output of good products by the conveyor belt. Ⅱ、Equipment Characteristics ● Variable angular speed (constant speed limit) high-speed winding, which can adapt to different winding needle widths, which is convenient for product switching; ● Servo closed loop low tension precision control system; ● EPC, serpentine correction system; ● Compatible with outsourcing of outer peripheral pole piece or diaphragm outsourcing of battery cell; ● Compatible with the welding function of the positive and negative plates; ● CCD detection winding alignment and closed-loop control of the correction system; ● CCD detecting the center distance and edge distance closed-loop control of the tabs; ● CCD detects the glueing accuracy of the protective tape of the positive and negative pole pieces; ● Automatically detect the distance from Sealant to the edge of the pole piece, closed-loop control; ● Detection of bad pole pieces and single-roll rejection without diaphragm for bad pieces; ● The function of automatically changing the pole piece. Ⅲ、Metal Shavings Control ● Use banned copper series pneumatic components; avoid using brass, nickel, and zinc materials for various mechanism parts; use non-metallic materials for parts that are in direct contact with electrode pieces and batteries.      

Laboratory Battery Laser Welding Machine For soft connector welding&filling hole sealing

1 This TMAX-PVM-5L Planetary vacuum mixer machine is a set of vacuum mixing, dispersion of efficient equipment, suitable for lithium electricity experiment process is anode paste mixing process, solder paste, silica gel, chemical industry, etc 2 This lab planetary mixer Mixing motor adopts transmission frequency adjustment,  can choose different rotational speed and torque according to different process, different viscosity. 3 The vacuum planetary mixer is excellent for preparing LiCoO3, LiFePO4, Phosphors and ceramic slurry without gas bubble. And the processed material results in the better dispersion and uniformity.

Laboratory Battery Laser Welding Machine For Top Case Welding

1 This TMAX-PVM-5L Planetary vacuum mixer machine is a set of vacuum mixing, dispersion of efficient equipment, suitable for lithium electricity experiment process is anode paste mixing process, solder paste, silica gel, chemical industry, etc 2 This lab planetary mixer Mixing motor adopts transmission frequency adjustment,  can choose different rotational speed and torque according to different process, different viscosity. 3 The vacuum planetary mixer is excellent for preparing LiCoO3, LiFePO4, Phosphors and ceramic slurry without gas bubble. And the processed material results in the better dispersion and uniformity.

Laboratory 8000W, 20kHz Ultrasonic Metal Welding Machine For Battery Prismatic Cell

1 This TMAX-PVM-5L Planetary vacuum mixer machine is a set of vacuum mixing, dispersion of efficient equipment, suitable for lithium electricity experiment process is anode paste mixing process, solder paste, silica gel, chemical industry, etc 2 This lab planetary mixer Mixing motor adopts transmission frequency adjustment,  can choose different rotational speed and torque according to different process, different viscosity. 3 The vacuum planetary mixer is excellent for preparing LiCoO3, LiFePO4, Phosphors and ceramic slurry without gas bubble. And the processed material results in the better dispersion and uniformity.