Single Station Cleaning Glove Box without Oxygen Water Sensor and Purification System

Single Station Cleaning Glove Box without Oxygen Water Sensor and Purification System (without purification system, water oxygen content <50ppm, without water oxygen analyzer)   I. Glove box standard configuration and main technical indicators 1. Box 1.1 Box size: 1200 (L) * 750 (W) * 900 (H) mm 1.2 Material: all stainless steel structure (Type 304), thickness 3mm, inner surface brushed. 1.3 2 Glove ports: 220mm in diameter, made of hard aluminum alloy with anti-corrosion treatment. 1.4 Gloves: American brand, glove caliber 8 inches, thickness 0.4 mm, butyl rubber material. 1.5 Window: front observation window (corrosion-resistant), tilted design of the operating surface, removable 8 mm safety tempered glass front window, wear-resistant, corrosion-resistant, good light transmission, sealing ring with 3/8 inch thick OMEGA seal. 1.6 Can maintain a certain pressure (0-12mbar) when using. 1.7 The box is equipped with anti-reflective lighting energy-saving lamps, soft light. 1.8 The box is preset with 1 multi-hole power terminal board (power supply: 220V±10% 50Hz±10%) 1.9 5 Standard KF-40 interfaces are set in the box for accessing liquid, gas, signal, etc. 1.10 Bracket: with casters, height 950mm. casters with leveling, moving, fixed and other functions. 1.11 Shelf: two adjustable stainless steel brackets behind.   2. Transition cabinet 2.1．Shape: cylindrical (304 stainless steel), and the glove box flange connection, the use of shaft-locked large transition cabinet 10mm thick, the gas of the spring diagonal pull easy to operate. 2.2. Size: diameter 360mm, 600mm long large transition cabinet, piston door, transition cabinet with a sliding tray, polished; 2.3. box set up a small transition cabinet on the right side, the right side of the specifications: diameter 150mm, length 300mm, manual valve control pumping and make-up air; 2.4. Tray: stainless steel, free to move the extension (used for large transition cabinet) 2.5 Vacuum ≤ 1bar (large and small right over the cabin are required to vacuum with display)   3. Control system 3.1 Inlet and outlet are controlled by solenoid valve. 3.2 Pressure control: control box pressure at a set value (0-12mbar), automatic pressure control. 3.3 Foot pedal: can control the pressure of the glove box, easy to operate. 3.4 The box is equipped with anti-reflective lighting energy-saving lamps, soft light.   4. Vacuum system The vacuum pump is British Edwards vacuum pump, model RV12, flow rate 12m3/h, ultimate vacuum 2x10-3 millibar. It can vacuum the transition chamber and realize separate control at any time. (Imported from abroad)   Product Configuration No. Configuration Unit (of measure) Amount Manufacturer/Brand Remarks 1 Boxes Set 1 TMAXCN 304 stainless steel, 3mm thick 2 Large transition cabinet  Set 1 TMAXCN Φ360*600 3 Small transition cabinet  Set 1 TMAXCN Φ150*300 4 Tempered glass window Set 1 TMAXCN Toughened glass 5 Glove ports Pcs 2 TMAXCN Hard Aluminum Alloy 6 Gloves Pair 1 American Guardian Imported 7 Power connection and lighting system inside the box Set 1 TMAXCN/Shenzhen MingKeMing Lighting, anti-reflective lighting energy-saving lamps Domestic 8 Pipe connections Set 1 France Legris Original import 9 Pressure gauge Sets 2 Germany WIka Original import 10 Shelf Sets 2 TMAXCN 304 stainless steel, 3mm thick 11 Pressure transducers Set 1 ±12.5kpa Customized 12 Solenoid valves Sets 2 Germany Bauder Imported