Ⅱ 、Main parameters of equipment

 Lower barrel parts

*Total  design volume: 287L

*Effective volume: 95-200L

*Inner diameter of container: 750mm

*Depth in container: 650mm

*Container material : 304 in contact with materials

*Type of temperature regulating jacket: single layer jacket on barrel wall, used for   cooling or heating; Single layer jacket at barrel bottom for cooling or heating             

*Temperature regulating jacket interface: G1 ", equipped with quick opening Union, jacket pressure resistance ≤ 0.4MPa

*Temperature regulating jacket circulation system: provided by the customer. It is    recommended that the jacket inlet temperature ≤ 8 C, and the cooling water flow > 60L / min

*Discharge form: a g1- 1 / 2 "three piece discharge ball valve at the bottom of the barrel

*Design ambient temperature: - 10 ~ + 120C

*Moving mode: caster mobile

Mixing parts:

*Working frequency: 5-50 Hz

*Mixing power: 15KW

*Speed of mixing paddle: 3-39rpm

*Planet box speed: 2.6-26rpm

*Diameter of mixing paddle: 428mm

*Mixer impeller type: spiral fried dough twist casting and machining ensure 90 degree helix.

*Mixing paddle material: 304

*Linear speed of mixing paddle: 0.09-0 9m/s

*Number of mixing paddles: 2

*Paddle to paddle distance: 8 ± 2mm

*Distance between paddle and barrel wall: 5 ± 1mm

*Distance between paddle and bucket bottom: 5 ± 1mm

Dispersed parts:

*Working frequency: 5-65hz

*Distributed power: 22kw

*Dispersive speed: 216-2808rpm

*Diameter of dispersion plate: 155mm

*Style: zigzag disc

*Material of dispersion plate: 304

*Linear speed of dispersion: 1.7-22.8m/s

*Number of distributed disks: 4

*Number of dispersion shafts: 2

Wall scraping parts:

*Material of wall scraping support: 304

*Material of wall scraping plate: polytetrafluoroethylene

*Wall scraping speed: consistent with the speed ofplanetary case

*Whether it is detachable: detachable design (the wall scraping must be removed in high viscosity process)

Base and lifting parts:

*Component material: carbon steel for high rigid structure

*Lifting mode: hydraulic cylinder

*Lifting guide: high precision linear guide rail

*Lifting stroke:  ≤ 740mm

Upper barrel parts:

*Upper barrel material: 304

*Powder feeding port: DN150, one quick installation with sight glass

*Liquid  feeding port: ISO  1 "quick installone

*Mirror port: one dn90 tempered glass mirror

*Vacuumizing port: G 3 / 4 "one

*Exhaust port: G3 / 4 "one

*M14 vacuum meter port × 1.5 one metric internal thread interface

Control system:

*Electrical cabinet: used to place low-voltage electrical components such as frequency converter

*Manual operation panel: used to place buttons, knobs, instruments, etc *Power supply:AC 3 × 380V±5% ，50Hz

*Control mode: electric control + hydraulic control

*Power control and speed regulation mode: frequency converter startup and control *Cooling method: air cooling and liquid cooling

*Operation mode: corresponding button + knob on the upper panel of the electric cabinet

*Digital temperature display table: material temperature

*Emergency stop button: one

*Alarm system: over temperature alarm, over temperature alarm shutdown, alarm shutdown

*Speed display: the panel table displays the speed

*Power indication: one

*A timer: one to control dispersion and mixing at the same time

*Attention: if the man-machine interface system configuration is selected, the  relevant contents of the control system will be integrated into the touch screen for control

Safety interlock system:

*Emergency stop: press the emergency stop switch and the equipment will stop immediately without any operation

*Start low-speed mixing: you can turn while lifting the barrel

*High speed dispersion: the barrel can be turned only when it rises in place              

*Safety lock during operation: when the machine is running and mixing, the mixing drum cannot be lowered or opened.

*To prevent the vacuum pipeline from flowing back: the special vacuum buffer tank design can effectively prevent the vacuum pump oil from flowing back to the mixing drum